Hopefully, all errors will be fixed right here, and you will not have to struggle with this system again. Otherwise, you will be running into the same errors in no time. There won’t be any more steps involved here, and the unit will respond accordingly without presenting more errors.į rom now on, you should also focus on storing the battery properly and not using it past the 20 percent charge limit. Once the 20 minutes are over, you can place the battery back into the charger, and that will be all that you need to fix the system. To jump the battery, you will need to rely on a pair of wires and a charged battery.įrom there, you can connect the terminals of the discharged battery with a charged one and leave them for 20 mins. So, if your battery is new and the charger simply won’t pick it up, then you’re in the same situation.Īll you have to do here is to jump the battery, and that will be more than enough to get the desired response. You will not be able to get a response from the unit when this unit is deeply discharged. In most cases, they should be able to help you out by providing you with relevant fixes and solutions.Īt this point, you need to check on the discharged battery to figure out what exactly is wrong with the system. You can try contacting the support team for Worx and then provide them with detailed information regarding the problem. When it comes to this, the only thing that you can do is get your charger replaced with a new one. Next, if you have tried the steps mentioned above but your charger is still overheating, then there is a high chance that it might be faulty. The solution for this issue is the same as the one mentioned above. This helps in ensuring that the charger does not get damaged. When it comes to this, people should remember that keeping their chargers away from moisture is important. The only case where this might get too cold is if you are living in a cold climate or if you have been keeping the charger in a spot where the temperatures were too low. Keep in mind that the charger can mostly overheat if you have been using it for a long time. In some cases, the light can also blink if the charger itself is too hot or too cold. You can then charge it without running into the same problem again. Keeping this in mind, the only thing that you have to do is wait for your battery to get back to a normal temperature. The main reason behind it is that trying to charge a lithium-ion battery while it is too hot or too cold can result in it getting damaged. The company has implemented a security feature that prevents the charger from working in these conditions. If you notice a red light blinking on it, then this means that the battery pack you have installed is either too hot or too cold. The LED light on the Worx charger is installed to indicate if the charger is working or not. If you are getting the same problem with your charger, then going through this article should help you in finding some ways that can be used to fix this.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |